Pullman Holt GB1400E Bedienungsanleitung Seite 1

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Scrubber Pullman Holt GB1400E herunter. Pullman Holt GB1400E User`s manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 18
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
GB1400E - electric floor scrubber
Operation & Care Instructions
Save For Future Reference
Seitenansicht 0
1 2 3 4 5 6 ... 17 18

Inhaltsverzeichnis

Seite 1 - Save For Future Reference

GB1400E - electric floor scrubberOperation & Care InstructionsSave For Future Reference

Seite 2

11OPERATION 1. PREPARING TO WORK The following procedures must be done before installing the tanks: 1. Check the switches are in the off (“0”)

Seite 3

1212OPERATION 3. FORWARD MOVEMENTS T

Seite 4

13AFTER THE WORK IS TERMINATED 6 . Move the machine to the place provided for draining the water 7. Detach the tubes and remove the recovery t

Seite 5

14DAILY MAINTENANCE ATTENTION: Disconnect the power cable from the main socket before carrying out any maintenance operations. 1. CLEANING T

Seite 6

15DAILY MAINTENANCE 3. REPLACING THE SQUEEGEE RUBBERS Check the condition of the squeegee rubbers. Replace as necessary.To replace the rubbers:

Seite 7

16SCHEDULED MAINTENANCE 1. CLEANING THE SQUEEGEE TUBE Check the squeegee tube for clogging if the suction is insuffiecient or at periodic inter

Seite 8

17TROUBLESHOOTING 1. ELECTRICAL SYSTEM SAFETY The machine has a thermal trip unit with manual reset. The brush motor is reset by resetting the

Seite 9

18BRUSH SELECTION AND USE POLYPROPYLENE BRUSH (PPL) These are used on all types of floors and offer good resistance to wear and to hot water (not m

Seite 10

LIMITED WARRANTY This scrubber is warranted for 1 year from the date of purchase as shown on your distributor's invoice. Parts not covered under

Seite 11

TABLE OF CONTENTS RECEIVING THE MACHINE...

Seite 12

Receiving the machine ForewardImmediately check, when receiving the machine, that all the materials indicated on delivery documents have been re

Seite 13

W 480 width Rear squeegee widthin 14in 17 Brushes (diameter or length) in 14Brush revolutions rp

Seite 14

6SYMBOLS USED ON THE MACHINE Tap symbol Used to indicate the solenoid valve switch Voltage symbol Used to indicate the machine's voltage

Seite 15

7GENERAL SAFETY REGULATIONS Follow these instructions carefully to avoid harm to the operator and damage to the machine.  Read the labels on the

Seite 16

8PREPARING THE MACHINE 1. HOW TO UNPACK THE MACHINE 1. Open the packaging on the side indicated. 2. Take the machine out of its packaging. 2.

Seite 17

9PREPARING THE MACHINE 3. CONNECTING THE MACHINE 1. Connect the extension lead to the plug on the handlebars 2. Block the extension lead to

Seite 18 - 09/12

10PREPARING THE MACHINE 6. RECOVERY TANK Make sure that the recovery tank is properly inserted in its housing and that the tubes areproperly ins

Kommentare zu diesen Handbüchern

Keine Kommentare